HP printer error code 49.4 c02

What happens when users see a mistake 49.4 c02 service error displaying on their HP Printers? The error arises within the printer thanks to print jobs.

You can always get a HP Printer Support for Code 49.4 c02 from us at one call

Besides, if you're a fanatical user of HP brand Printer then you'll follow the step by step guidance as given below:

1. Delete Print Jobs Queue

To delete all the print jobs from your printer you only need to click on the printer icon which is present on rock bottom right-hand corner of your computer.
You have to right click to open the print queue and once the list is open you've got to delete all the roles .

2. Print a Test Page
The first step is to modify off the printer.
Now, disconnect all the cables that plugs to your computer then switch it back on.
And, if your HP printer is in ready state when the cable id disconnected.
Then print a test page.
And, if you're unable to repair the HP printer error code 49.4c02.

3. Disable Advance Printing Features
You have to travel to Windows logo pictures.
Then you've got to settle on the printer queue.
You have to click on the left click and choose the printing preference.
You have to pick the advance option.
And under the document option you'll choose the advance printing features.
You have to settle on it to disabled.
You can now try printing a test page and if the error persists then you'll advance to subsequent step.

4. Check whether you’re using the Franklin Gothic Book font
For PCL 5e and PCL6 drivers: you've got to enable the ‘Send True Type as Bitmaps’ which are present under the settings of advanced tab of either of two drivers. it'll allow the document to print without causing any trouble.
For PS drivers: you've got to line truth type font download choice to Bitmap. it'll allow you to print document with none hassle and HP print error code 49.4c02. you've got to travel to the advanced tab under PostScript options to try to to an equivalent .
If you would like you'll also install the font on the printer’s disk drive employing a suitable plugin. it'll allow the font or document to print without using the Bitmap settings as we've mentioned above.

5. Flash and update the firmware

Switch on your printer.
Now, check whether ready is displayed on the LCD or not.
You have to undertake printing a test document.
You have to see the firmware revision of your printer then you've got to try to to the following:
You have to press the select button.
Now, press the down button to spotlight information menu.
Then press select.
You have to depress the display print configuration on the LCD.
Try printing a test page.
(Note: confirm there are not any interruptions during the method of upgradation process because it's going to damage the printer severely.)

And, once the upgrade is complete your LCD will display ready.
You have to show off the printer and await about 15 seconds just before turning it on.
You have to undertake printing a test page and check the firmware revision as listed under printer information on the test page.

Source : HP Printer error code 49.4 c02